What Are Lead Alloys And Its Applications/Uses?


Lead Base Alloys
Lead Alloys
Because lead is very soft and ductile, it is normally used Commercially as lead alloys. Antimony, tin, arsenic, and calcium are the most common alloying elements. Antimony generally is used to give greater hardness and strength, as in storage battery grids, sheet, pipe, and castings. Antimony contents of lead-antimony alloys can range from 0.5 to 25%, but they are usually 2 to 5%.
Lead-calcium alloys have replaced lead-antimony alloys in a number of applications, in particular, storage battery grids and casting applications. These alloys contain 0.03 to 0.15% Ca. More recently, aluminum has been added to calcium-lead and calcium-tin-lead alloys as a stabilizer for calcium. Adding tin to lead or lead alloys increases hardness and strength, but lead-tin alloys are more commonly used for their good melting, casting, and wetting properties, as in type metals and solders. Tin gives the alloy the ability to wet and bond with metals such as steel and copper; unalloyed lead has poor wetting characteristics. Tin combined with lead and bismuth or cadmium forms the principal ingredient of many low-melting alloys.
Arsenical lead (UNS L50310) is used for cable sheathing. Arsenic is often used to harden lead-antimony alloys and is essential to the production of round dropped shot.

Applications

The most significant applications of lead and lead alloys are lead-acid storage batteries (in the grid plates, posts, and connector straps), ammunition, cable sheathing, and building construction materials (such as sheet, pipe, solder, and wool for caulking). Other important applications include counterweights, battery clamps and other cast products such as: bearings, ballast, gaskets, type metal, terneplate, and foil. Lead in various forms and combinations is finding increased application as a material for controlling sound and mechanical vibrations. Also, in many forms it is important as shielding against x-rays and, in the nuclear industry, gamma rays. In addition, lead is used as an alloying element in steel and in copper alloys to improve machinability and other characteristics, and it is used in fusible (low-melting) alloys for fire sprinkler systems.

Battery Grids. The largest use of lead is in the manufacture of lead-acid storage batteries. These batteries consist of a series of grid plates made from either cast or wrought calcium lead or antimonial lead that is pasted with a mixture of lead oxides and immersed in sulfuric acid.

Battery Grids

Type metals, a class of metals used in the printing industry, generally consist of lead-antimony and tin alloys. Small amounts of copper are added to increase hardness for some applications.

Cable Sheathing. Lead sheathing extruded around electrical power and communication cables gives the most durable protection against moisture and corrosion damage, and provides mechanical protection of the insulation. Chemical lead, 1% antimonial lead, and arsenical lead are most commonly employed for this purpose.

Lead Cable Sheath

Sheet. Lead sheet is a construction material of major importance in chemical and related industries because lead resists attack by a wide range of chemicals. Lead sheet is also used in building construction for roofing and flashing, shower pans, flooring, x-ray and gamma-ray protection, and vibration damping and soundproofing. Sheet for use in chemical industries and building construction is made from either pure lead or 6% antimonial lead. Calcium-lead and calcium-lead-tin alloys are also suitable for many of these applications.

Lead Sheet

Pipe. Seamless pipe made from lead and lead alloys is readily fabricated by extrusion. Because of its corrosion resistance and flexibility, lead pipes finds many uses in the chemical industry and in plumbing and water distribution system. Pipe for these applications is made from either chemical lead or 6% antimonial lead.

Lead Pipe

Solders in the tin-lead system are the most widely used of all joining materials. The low melting range of tin-lead solders makes them ideal for joining most metals by convenient heating methods with little or no damage to heat-sensitive parts. Tin-lead solder alloys can be obtained with melting temperatures as low as 182 °C and as high as 315 °C. Except for the pure metals and the eutectic solder with 63% Sn and 37% Pb, all tin-lead solder alloys melt within a temperature range that varies according to the alloy composition.

Solders

Lead-base bearing alloys, which are called lead-base babbitt metals, vary widely in composition but can be categorized into two groups:

  •      Alloys of lead, tin, antimony, and, in many instances, arsenic
  •      Alloys of lead, calcium, tin, and one or more of the alkaline earth metals
Lead-Base Bearing Alloys
Ammunition. Large quantities of lead are used in ammunition for both military and sporting purposes. Alloys used for shot contain up to 8% Sb and 2% As; those used for bullet cores contain up to 2% Sb.

Ammunition

Terne Coatings. Long terne steel sheet is carbon steel sheet that has been continuously coated by various hot dip processes with terne metal (lead with 3 to 15% Sn). Its excellent solderability and special corrosion resistance make the product well-suited for this application.

Trene Coating

Lead foil, generally known as composition metal foil, is usually made by rolling a sandwich of lead between two sheets of tin, producing a tight union of the metals.

Lead Foil

Fusible Alloys. Lead alloyed with tin, bismuth, cadmium, indium, or other elements, either alone or in combination, forms alloys with particularly low melting points. Some of these alloys, which melt at temperatures even lower than the boiling point of water, are referred to as fusible alloys.

Fusible Alloys

Anodes made of lead alloys are used in the electrowinning and plating of metals such as manganese, copper, nickel, and zinc. Rolled lead-calcium-tin and lead-silver alloys are the preferred anode materials in these applications, because of their high resistance to corrosion in the sulfuric acid used in electrolytic solutions. Lead anodes also have high resistance to corrosion by seawater, making them economical to use in systems for the cathodic protection of ships and offshore rigs.

Anodes

Below is listed the Unified Numbering System (UNS) designations for various pure lead grades and lead-base alloys.
Pure leads L50000 - L50099
Lead - silver alloys L50100 - L50199
Lead - arsenic alloys L50300 - L50399
Lead - barium alloys L50500 - L50599
Lead - calcium alloys L50700 - L50899
Lead - cadmium alloys L50900 - L50999
Lead - copper alloys L51100 - L51199
Lead - indium alloys L51500 - L51599
Lead - lithium alloys L51700 - L51799
Lead - antimony alloys L52500 - L53799
Lead - tin alloys L54000 - L55099
Lead - strontium alloys L55200 - L55299


What is pure Lead and its applications/Uses?


About half of all lead produced each year comes from recycled material, which means that lead has one of the highest recycling rates of all materials in common use today. In 2008, worldwide production of lead exceeded 8 million tonnes.

The largest producers of mined lead are China, Australia, and the USA, whereas the largest producers of recycled lead are the USA, China, and Germany. China alone accounts for about 60 percent of all lead production.

The most economically important lead ore is called galena. Galena contains lead sulfide (PbS), as well as zinc and silver, all of which can be extracted and refined to produce pure metals. Other ores that are mined for lead include anglesite and cerussite.

A large proportion (about 90 percent) of all lead is used in lead-acid batteries, lead sheets and other metal applications that are recyclable. As a result, about 5 million tonnes of lead (or 60 percent of all production) were produced from recycled materials in 2009.

Applications
  • The primary application for lead continues to be in lead-acid batteries, which account for approximately 80 percent of the metal's use.
  • Lead acid batteries are ideal for all types of vehicles because of their relatively large power-to-weight ratio, which allows them to supply the high surge currents required by automobile starter motors.
  • Advances in lead-acid battery discharge/charge cycles have also made these viable as power storage cells at emergency power stations for hospitals and computer installations, as well as in alarm systems. They are also used as storage cells for renewable energy sources, such as wind turbines and solar cells.
  • Although pure lead is very reactive, lead compounds, such as lead oxide, can be very stable, making them suitable as ingredients in corrosion resistant coating for iron and steel. Lead coatings are used to protect ship hulls, while lead stabilizers and sheathings are used to protect underwater power and communication cables.
  • Lead alloys are still used in some bullets and, due to the metal's low melting point, in metal solders. Lead glass has special applications in camera lenses and optical instruments, while lead crystal, which contains up to 36 percent lead, is used to create decorative pieces. Other lead compounds are still used in some paint pigments, as well as matches and fireworks.

Automotive Lead Acid Battery Market by Manufacturers, Regions, Type and Application Forecast to 2025

The research report presents a comprehensive assessment of the market and contains thoughtful insights, facts, historical data, and statistically supported and industry validated market data. It also contains projections using a suitable set of assumptions and methodologies. The research report provides analysis and information according to categories such as market segments, geographies, type of product and deal landscapes. The lead acid battery was invented in 1859 by French physicist Gaston Plante and is the oldest type of rechargeable battery. Despite having a very low energy-to-weight ratio and a low energy-to-volume ratio, its ability to supply high surge currents means that the cells have a relatively large power-to-weight ratio. These features, along with their low cost, make them attractive for use in motor vehicles to provide the high current required by automobile starter motors.
Lead Acid Battery

Among regions, the Asia Pacific market is estimated to see a CAGR of 5.8% from 2017 to 2025, in terms of value.

The major market players are evaluated on various parameters such as company overview, product portfolio, and revenue of Automotive Lead Acid Battery from 2013 to 2025.

Automotive Lead Acid Battery Global Market Report from Market Insights Reports covers market characteristics, size and growth, segmentation, regional breakdowns, competitive landscape, market shares, trends and strategies for this market.The market characteristics section of the report defines and explains the market.The market size section gives the electronic equipment market revenues, covering both the historic growth of the market and forecasting the future. Drivers and restraints looks at the external factors supporting and controlling the growth of the market. Market segmentations break down the key sub sectors which make up the market. The regional breakdowns section gives the size of the market geographically.

The research includes historic data from 2011 to 2017 and forecasts until 2025 which makes the reports an invaluable resource for industry executives, marketing, sales and product managers, consultants, analysts, and other people looking for key industry data in readily accessible documents with clearly presented tables and graphs.

This report provides detailed analysis of worldwide markets for Automotive Lead Acid Battery from 2011-2017, and provides extensive market forecasts (2018-2025) by region/country and subsectors. It covers the volumes, prices, historical growth and future perspectives in the Automotive Lead Acid Battery market and further lays out an analysis of the factors influencing the supply/demand for Automotive Lead Acid Battery, and the opportunities/challenges faced by industry participants. It also acts as an essential tool to companies active across the value chain and to the new entrants by enabling them to capitalize the opportunities and develop business strategies.

The Recycling Of Lead-Acid Batteries

Recycling of lead-acid batteries is a process of great interest in the lead industry. Nowadays, about 47% of the total world lead production results from lead secondary smelting. The main raw material entering this process is the used lead-acid battery, whether being a starter, a traction or a standby battery. Roughly, about 85% of used batteries are recycled.

Recycled Lead Ingots
Lead recycling industry has also become a net producer of recycled plastic: polypropylene, recyclable material whose consumption as battery boxes is increasing. The Metaleurop group, already premier lead producer in EEC, has become through its subsidiary division C2P (Cookson Penarroya Plastics) the first European producer of recycled polypropylene from lead-acid battery boxes.

The lead acid battery is a complex industrial product, constituted by several different materials. The first step of the recycling process is an effective separation of these battery components, so as to recover further valuable products. Throughout the separation process, crushing, sieving and flotation techniques are used.

The second step of the process is to melt and reduce lead compounds into metal, and then to refine this metal for new applications, like batteries. Contrary to other recycled products, lead quality is not lowered through secondary smelting, and is of the same high grade as lead from primary smelting.

Transformation of Lead Battery

Lead acid batteries either start or power cars, trucks, buses, boats, trains, rapid mass-transit systems, recreational vehicles and electric wheelchairs all over the globe. The car battery also provides a stable electrical supply to a vehicle’s electrical system.

During power outages, lead acid batteries provide quiet, pollution-free emergency power for critical operations such as air-traffic control towers, hospitals, railroad crossings, military installations, submarines, and weapons systems. In these situations the telephones stay on and this is because every major telephone company in the world, including mobile telephone service providers, uses lead acid batteries as backup power to the telecommunications systems.

Were it not for standby lead acid batteries, we probably would have power outages nearly every day because the electric utilities would not be able to handle rapid fluctuations in the demand for electricity. This is when lead acid batteries come to the rescue, as enormous arrays of batteries delivering large amounts of electricity for short periods of time until additional capacity is added to the grid.

Lead acid batteries power electric fork trucks used in warehouses, factories, mines, and ships. They also power the shuttle vehicles in airports, as well as wheelchairs, amusement park shuttles and golf carts. On the road, lead acid batteries power electric law-enforcement vehicles, buses, and very soon mail delivery vans.