Alloying
furnaces are kettle / pots, which are highest precession of desired specification
for manufacturing alloys. These furnaces are of various capacities ranging from
5-50 MT per batch accompanied by high efficiency natural gas / LPG Gas /
furnace oil burners equipped with preheating arrangements. Emissions are
controlled by a flexible kettle hood, with series of Pollution Control Equipments chained with Wet Scrubber, attached to an Induced Draft Fan along
with a chimney/stack arrangement.
GRAVITA
Lead forms several oxides. Lead The most common being lead oxide (PbO), Red Lead (Pb3O4) and lead dioxide (PbO2)
By heating lead(II) nitrate:
2Pb(NO3)2 → 2PbO + 4NO2 + O2
or
By heating lead (II) carbonate:
PbCO3 → PbO + CO2
The latter process is preferred since the production of toxic nitrogen dioxide (NO2) is avoided.
In an ancient industrial process, lead was indeed heated at 600°C in air [lead melts at 327.5 °C] to produce a grey powder containing metallic lead.
PURE lead (II) oxide can be prepared in one of 2 ways:By heating lead(II) nitrate:
2Pb(NO3)2 → 2PbO + 4NO2 + O2
or
By heating lead (II) carbonate:
PbCO3 → PbO + CO2
The latter process is preferred since the production of toxic nitrogen dioxide (NO2) is avoided.
GRAVITA
The International Lead and Zinc Study Group released preliminary data for world lead supply and demand during 2012. The data compiled by the ILZSG indicate that in 2012 global supply of refined lead metal exceeded demand by 64 kilo tonne. Over the same period inventories reported by the London Metal Exchange Shanghai Future Exchange and producers and consumers increased by 23 kilo tonne totalling 628 kilo tonne the year end.
Global lead mine production increased by 11.5% compared to 2011. Output was higher in a number of countries including Mexico, Peru, the Russian Federation and Turkey, however the increase was principally due to a reported 20.4% rise in China.Other key results are:
Rises in output of refined lead metal in the India, the Republic of Korea, the United Kingdom and the United States were largely balanced by reductions in Australia, Kazakhstan, Morocco, New Zealand and Spain resulting in a limited global increase of 0.2%. Output in China was at the same level as in 2011.
Despite a further decline in European demand for refined lead metal of 2.4%, world usage increased by 1.3%. This was primarily a consequence of higher demand in India, Japan, Mexico and the United States. Apparent demand in China was unchanged from 2011. China’s imports of lead contained in lead concentrates rose by 26.3% to reach a record of just over a million tonnes.
Cash Settlement and Forward Three Month Prices on the LME averaged USD 2061 and USD 2073 respectively during 2012, 14% and 13.3% lower than during 2011. The highest Cash Settlement Price of USD 2340 was recorded on 31 December and the lowest of USD 1744 on 27 June.
Source: ILZSG
Global lead mine production increased by 11.5% compared to 2011. Output was higher in a number of countries including Mexico, Peru, the Russian Federation and Turkey, however the increase was principally due to a reported 20.4% rise in China.Other key results are:
Rises in output of refined lead metal in the India, the Republic of Korea, the United Kingdom and the United States were largely balanced by reductions in Australia, Kazakhstan, Morocco, New Zealand and Spain resulting in a limited global increase of 0.2%. Output in China was at the same level as in 2011.
Despite a further decline in European demand for refined lead metal of 2.4%, world usage increased by 1.3%. This was primarily a consequence of higher demand in India, Japan, Mexico and the United States. Apparent demand in China was unchanged from 2011. China’s imports of lead contained in lead concentrates rose by 26.3% to reach a record of just over a million tonnes.
Cash Settlement and Forward Three Month Prices on the LME averaged USD 2061 and USD 2073 respectively during 2012, 14% and 13.3% lower than during 2011. The highest Cash Settlement Price of USD 2340 was recorded on 31 December and the lowest of USD 1744 on 27 June.
Source: ILZSG
GRAVITA
Past Uses:
- In the past lead solders and alloys have been used as car body fillers, now largely replaced by plastics (Bondo).
- In the past it has been used as a fuel additive, purportedly to soften the opening and closing of engine valves.
- In the past it has been used in paints (although recently there was a report of imported toys with lead based paints).
- Old houses may use lead solders on copper water pipes, now not legal.
- Romans were said to have made lead potable water pipes in their cities.
- Many Russian and Middle Eastern Samovars are used to make hot tea water, and were assembled with lead based solders.
- Lead-Silver Alloy called pewter used in various cookware.
GRAVITA
Spent lead-acid batteries from automobiles contain lead and sulfuric acids and are fully regulated as a hazardous waste. However, when intact they can be managed for recycling, and the handling requirements are relaxed. Generators of lead-acid batteries include auto repair shops, parts stores and service stations, as well as other businesses and factories that generate dead or damaged batteries. Businesses must take care in the way that they store batteries prior to shipment to a recycler, as follows.
STORAGE REQUIREMENTS
Undamaged batteries should be stored upright on a covered pallet over a non-reactive, curbed and sealed surface such as coated concrete or asphalt, and care should be taken to prevent the terminals from short-circuiting.
Damaged batteries are batteries that are cracked, broken, or missing one or more caps. The business must store and transport damaged batteries in non-reactive, structurally-secure, closed containers such as polyethylene buckets or drums. If missing caps can be replaced and there are no other leaks or damage, the battery can be managed along with intact batteries.
ACCUMULATION REQUIREMENTS
Businesses must label containers holding damaged batteries in ink or paint with the date the first battery was placed there. This is considered the accumulation start date. There are no labeling requirements for undamaged batteries, but there are associated accumulation time limits for both damaged and undamaged batteries, as follows:
• Businesses that have less than one ton of batteries may store the batteries on site for no more than one year.
• Businesses that have more than one ton of batteries may not store them longer than 180 days.
If these quantities or times are exceeded, the business is no longer exempt from the regulations for generation, storage and transportation of hazardous waste.
TRANSPORTATION REQUIREMENTS
If a business ships more than 10 batteries at a time, a legible hazardous waste manifest or a legible bill of lading must accompany the shipment. The generator, transporter and storage, recycling, or disposal facility each must retain their copies of either of those documents for three years. The bill of lading must be dated and show the name and addresses of the generator, transporter, and receiving location, as well as the number of batteries transported. The business may transport damaged batteries (packaged as described above) with intact batteries, as long as all Department of Transportation (DOT) standards are met.
RECORD KEEPING REQUIREMENTS
Businesses generating or handling more than 10 batteries per year and those who transport more than 10 batteries at a time are required to keep all copies of bills of lading and manifests related to the transportation of lead-acid batteries for a period of at least three years.
Businesses generating no more than 10 batteries per year, and storing or transporting no more than 10 batteries at one time, are not subject to the reporting and record keeping, requirements given in the battery regulations as long as the batteries will go to someone who stores, recycles, uses, reuses or reclaims them. This also applies to people who trade in an old battery for a new one and to the person accepting the trade-in. All businesses, however, must comply with storage and accumulation requirements given in the battery regulations.
Disclaimer
This guidance document does not replace or supersede relevant statutes and regulations. It is intended for informational purposes only and may not encompass all of the statutes and regulations to this topic. More details may be found at Cal EPA Department of Toxic Substances Control (DTSC) www.dtsc.ca.gov
STORAGE REQUIREMENTS
Undamaged batteries should be stored upright on a covered pallet over a non-reactive, curbed and sealed surface such as coated concrete or asphalt, and care should be taken to prevent the terminals from short-circuiting.
Damaged batteries are batteries that are cracked, broken, or missing one or more caps. The business must store and transport damaged batteries in non-reactive, structurally-secure, closed containers such as polyethylene buckets or drums. If missing caps can be replaced and there are no other leaks or damage, the battery can be managed along with intact batteries.
ACCUMULATION REQUIREMENTS
Businesses must label containers holding damaged batteries in ink or paint with the date the first battery was placed there. This is considered the accumulation start date. There are no labeling requirements for undamaged batteries, but there are associated accumulation time limits for both damaged and undamaged batteries, as follows:
• Businesses that have less than one ton of batteries may store the batteries on site for no more than one year.
• Businesses that have more than one ton of batteries may not store them longer than 180 days.
If these quantities or times are exceeded, the business is no longer exempt from the regulations for generation, storage and transportation of hazardous waste.
TRANSPORTATION REQUIREMENTS
If a business ships more than 10 batteries at a time, a legible hazardous waste manifest or a legible bill of lading must accompany the shipment. The generator, transporter and storage, recycling, or disposal facility each must retain their copies of either of those documents for three years. The bill of lading must be dated and show the name and addresses of the generator, transporter, and receiving location, as well as the number of batteries transported. The business may transport damaged batteries (packaged as described above) with intact batteries, as long as all Department of Transportation (DOT) standards are met.
RECORD KEEPING REQUIREMENTS
Businesses generating or handling more than 10 batteries per year and those who transport more than 10 batteries at a time are required to keep all copies of bills of lading and manifests related to the transportation of lead-acid batteries for a period of at least three years.
Businesses generating no more than 10 batteries per year, and storing or transporting no more than 10 batteries at one time, are not subject to the reporting and record keeping, requirements given in the battery regulations as long as the batteries will go to someone who stores, recycles, uses, reuses or reclaims them. This also applies to people who trade in an old battery for a new one and to the person accepting the trade-in. All businesses, however, must comply with storage and accumulation requirements given in the battery regulations.
Disclaimer
This guidance document does not replace or supersede relevant statutes and regulations. It is intended for informational purposes only and may not encompass all of the statutes and regulations to this topic. More details may be found at Cal EPA Department of Toxic Substances Control (DTSC) www.dtsc.ca.gov
Subscribe to:
Posts (Atom)
